Oct 26, 2020 Leave a message

Laser engraving for glass

       Click here to watch machine videos .15

        Laser engraving for hollow glassware, plane glass and special glass.

        Glass is a transparent solid-like material, which is widely used in people's daily lives. Due to the fragile properties of glass, the process for processing glass is quite complicated. However, laser technology provides a more accurate method of processing glass.

Material suitable for laser engraving of glass:

*Crystal glass

*Mirror

*Drinking cup

*Wine glass

*Elevator panel

*Windowpane

Display for laser engraving sample of glass

 (1) (2)
 (3) (4)

Why buy a laser marking machine for engraving and processing glass?

        As a non-contact processing uses single photon absorption in the wavelength range, the laser marking machine has greatly reduces the risk of glass breakage. Using laser-engraved glass, a clear imprint can be marked directly on the glass surface, which requires a pure surface.

The application of laser marking machine in the glass industry

        Widely used in construction, daily use, medical care, chemical industry, home furnishing, electronics, instrumentation, nuclear engineering and other fields. Glass wares play an important role in our lives, such as glasses, glass coffee tables, glass decorations, glass dishes, and so on. Closely related to our lives, all kinds of glass decorate our colourful lives with the continuous development of science and technology. Marking patterns and graphics by laser on the glass wares, whether engraving or printing, has already been a very common technique, which is constantly innovating and refreshing our understanding of the products.

        In order to be able to engrave glass, the energy density of a laser beam must be greater than a critical value, or threshold, that causes the glass to break, while the energy density of a laser beam on certain position depends on the size of the spot at that point, which means, for the same laser beam, the smaller the spot size is, the greater the energy density is produced at that point. In this way, by proper focusing, the energy density of the laser beam can be lower than the damage threshold of the glass before entering the glass or reaching the processing zone, while in the region where the processing is implemented by exceeding this critical value, will generate pulses in an extremely short time, which can instantaneously cause the crystal to heat and crack, producing a tiny white spot, carving a predetermined shape inside the glass, while the rest of the glass or crystal remains intact.

Laser marking for glass can be done in the following ways:

        1.Multiple laser radiation method

        A laser radiation is used to generate a contour-conspicuous mark on the surface of the glass, after a few days, the laser is spread to the area outside the original mark to form a fragment. Multiple radiation heats the area adjacent to the marked area by heat conduction, thereby reducing the secondary cracking possibility, this method is very effective in soda-lime glass and borosilicate glass marking. A laser radiation is more effective in marking silica glass and quartz glass because of their much lower expansion coefficient.

        2.Discrete point forming annular crack method

        A series of annular cracks are used to form text, bar code, square or rectangular code, and other shape code patterns. The CO2 laser marking machine often adopts this method, by setting a marking parameter that causes fewer cracks. It produces discrete points on the glass to form annular cracks through the heating and cooling cycles. When the glass is heated, it expands and squeezes the surrounding material while the temperature rises to the softening point of the glass, rapidly expands to form a dome with low density on the convex of the surface.

        3. Polygon surface cracking method

        With the heating and cooling process, the influenced glass surface changes. The effect of this method is not immediately visible but it only slightly produces a polygon crack along the laser marking area after being pressed. This method can print a clear mark on high-quality automotive glass that requires purity to the surface.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry